My goals have changed, I am aiming for 600-650 wheel running e85. So far I have a new denso oem tt pump in the stock tank. I plan on using a fst from either http://store.radiumauto.com/index.php?p=product&id=51&parent=0
The dual aeromotve with mount is 809$
Or http://www.intengineering.com/catalog/product/view/id/191/category/13/
Undecided on which one I should get as of now...
Either one would be fed with -6an line from the denso In tank and each pump would e ran to either side of my srt Cnc fuel rail with -6an lines and a -6an center exit to aeromotive afpr. And I am undecided once again between id1000cc's or fic 1100cc high impedance.
Help opinions experience!!?? All needed and welcome! Thanks.
The dual aeromotve with mount is 809$
Or http://www.intengineering.com/catalog/product/view/id/191/category/13/
Undecided on which one I should get as of now...
Either one would be fed with -6an line from the denso In tank and each pump would e ran to either side of my srt Cnc fuel rail with -6an lines and a -6an center exit to aeromotive afpr. And I am undecided once again between id1000cc's or fic 1100cc high impedance.
Help opinions experience!!?? All needed and welcome! Thanks.