Front seat question....

[pbsupra90]

I am installing a nice eurocrew sheepskin for my 90 Supra. They are a grayish blue and would give the interior a pimped out look, and protect the seats. My question is that the top has a hood type design that goes over the head rest. I know there are screws or pins that attach the head rest to seat. How do I remove head rest if that is possible, or could I just lift head rest so hoodie will completely cover it. I am concerned that hoodie will not go all the way down head rest in back because it will be stopped by whatever is holding the head rest in place. I am very green when it comes to installing things and how they work. I have never even really touched my head rest nor have I adjusted it. thanks

 

[Dan_Gyoba]

The head rest can be raised. There is a latch on the inside that allows the head rest to be raised and lowered. It also has adjustment for forward and back a little. It's a ratchet that locks in (IIRC) 3 positions forward, then allows it to come all the way back after being pushed forward once more. I do not believe that the head rest can be removed.

 

[pbsupra90]

Thanks....where exactly is the latch? In between head rest and rest of seat? And what would it look like? Car has blue interior. I have never seen any kind of latch. A pick would help...but I know that might be a bit of a hassle.

 

[Dan_Gyoba]

It's on the inside area. You'll have to search around for it. I can't get into my car on account of it being buried in snow.

 

[pbsupra90]

Thanks...found the latch. Was able to life headrest all the way up. Appreciate your time and helping me out. Take care.