For the electrical Experts- Crimping tool question

[turbogate]

Would any of these be considered good crimping tools? Is there one that you guys prefer, like those ratcheting crimpers? I have a couple of examples links, you advice is appreciated. Or should I look into a different style of crimper tool?

Thanks

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&classNum=238&subdeptNum=124&storeNum=9&productId=25621

http://cgi.ebay.com/MATCO-TOOLS-RATCHETING-CRIMPER-FOR-RED-YELLOW-BLUE_W0QQitemZ330095732877QQcategoryZ66987QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/Professional-Ratcheting-Terminal-Crimper_W0QQcmdZViewItemQQcategoryZ35625QQitemZ160092164072QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/New-Professional-Ratcheting-Terminal-Crimper_W0QQitemZ260093511165QQcategoryZ66987QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[Justin]

These are what I prefer. I use mine on a daily basis....

 

[WeDgE]

These are what I prefer. I use mine on a daily basis....

I use the exact same pair everyday...except mine are blue.

 

[drunk_medic]

I have a set of those as well.

What you use all depends on what you are going to be crimping, really. My favorite for "yellow, blue, red" environmental splices is something very similar to what is shown here:
http://www.edmo.com/index.php?module=products&func=display&prod_id=19070&cat_id=740

DMC/Daniels crimp tools are, for the most part, bad-ass if you know what you are doing.