hi yall, does any body know what happen when the fog light fuse keep on popped every time i turn my fog light on? where should i look at? this just happen after i change the plug on my ecu. does those plug into the ecu have any to do with the fog light? can any one pin point the shortage for me please?
fog light shortage, help
- Thread starter vajbi
- Start date
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=076
did you scrape the front end with wires hanging? you have a short somewhere in the circuit.
did you scrape the front end with wires hanging? you have a short somewhere in the circuit.
no i didn't touch any wire in the front, i only touch those in the glove department. so as for right now i have no clue. thanks kyle
check the relay
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=15
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=BE&P=22
use the tail light relay pic for the fog light relay. apply power and ground to pins 1 and 3 and check for continuity(ohms) on 2 and 4.
also replace fuse pull one bulb see if it pops. try the other side too. they have separate grounding points.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=15
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=BE&P=22
use the tail light relay pic for the fog light relay. apply power and ground to pins 1 and 3 and check for continuity(ohms) on 2 and 4.
also replace fuse pull one bulb see if it pops. try the other side too. they have separate grounding points.