I took off the clutch today on my 87 turbo, and noticed that one of the flywheel guides were bent out of shape. Are these replaceable or do I need a new flywheel?
Flywheel guides/pins?
- Thread starter reincaster
- Start date
Are they a dealer only part? checked a fiche on toyota parts cheap, but can't sseem to locate it.
I had my flywheel resurfaced at a local parts store, and they told me it would be $2 each if they needed to replace any. They looked fine to me, and I believed if they needed to, it would be because they screwed it up, but whatever, none needed.
Perfect! My local toyota can't locate it, must be one of those things with a weird name or location on the fiche.
http://www.cygnusx1.net/Supra/Library/EPC/291420/Parts/13405A.aspx
If they could not find that then they are morons. Its a different story if they are discontinued which i highly doubt they are.
If they could not find that then they are morons. Its a different story if they are discontinued which i highly doubt they are.
They were probably looking in the clutch section, which is normal. Toyota, in their infinite wisdom, listed the flywheel with the crank in the engine section instead.