ffi 7m pics please post

[suprra_girl]

hey ya'll

i need some pics of ffi 7m's showing their isc routing
i'm undecided on venting to atmosphere or back to intake
and if i do vent back to intake how can i do it blingingly

 

[IJ.]

Do it all underneath, run the return in just on the other side of the TB into the bottom of the IC pipe where it's hidden from view...

 

[suprra_girl]

not a bad idea... i'll have a look tomorrow and see how that'll work out, and give my tb guy a ring and see if he's removed the pipe outta the tb yet lol if not then i can just plumb it straight in there, i'll probly use braided line just in case you can see it hehe

 

[lintlars]

Im running the 1uz TB and it has a port in the bottom of the TB and I running a 6" hose from the ISC to that port its all hidden from sight

 

[suprra_girl]

that's the tb i'm using, just gonna see if that part has been removed yet as that was my original instruction lol

thanks

 

[MKIIINA]

im running mine open to the air with a vpc with a filter on top of it. right off the mani

 

[suprra_girl]

so if my thinking is correct, the isc sucks, so wouldn't the fuel mixture end up being a bit leaner than what the ecu thinks?

found out the pipe on the 1uz tb hasn't been removed yet yayy so i'll end up using that

lintlars: what tps have you used?
and how did you get it to work?

thanks

and what still no pics? lol it's an opportunity to show off ya ffi's ya know

 

[lintlars]

Im using the stock 7m TPS and modified the internal butterfly so I can bolt on the stock TPS

Ill take pics soon im not done making my intercooler pipes and turbo lines I dont like to show anything till its fully completed !