Eman Ultimate on a 1j ??

[Yakuzastinger]

I have an eman U here going on a stock 1j mk3 mods to come of course

i have been reading for days and days on info on both forums and i have found some ecu pinouts but not exactly what i want

The eman i have has a 1j plug n play harness but the pinouts in the Eman U install guide are not matching up the harness. Such as the knock wire is not going to the knock pinout on the 1j. I also have some question about the jumpers.

Has anybody got this working on a 1j? i have seen bishops 7m setup and lot of 2j info but 1j info is limited.

 

[wiseco7mgt]

are the emanage pinouts to suit the jdm spec or the u.s?
i have the jdm 1jz ecu pinouts if that helps at all...

 

[Yakuzastinger]

i have got all the greddy manuals checked the pinout on SM vs greddys both seem to match.

Big problem i ran into is there is a quick connect harness on this Eman but greddy does not make one for the supra 1j make on for all the other 1js but not the supra.

Sat down for hours chasing wires and the Eman plugs are wrong and missing wires so I pulled all the pins out and started from scratch. Also cut up the plug and play harness it was all wrong and some of the header pins were broke off.

So now the jumpers were giving me trouble I can set because I know how I will wire the Eman I am still looking for a PnP harness for this though. Also would like input from those that have a 1j running an Eman.

 

[turbodriz]

Good to see people on this neck of the woods.

 

[Yakuzastinger]

Depends on how much $$ i can throw at this but i need a new eman harness and i would like to get a harness exteneder as it is from auto wiring and make my own quick harness i think its the best way to go though a bit pricey i did contact greddy as useless as that was kid said they be mkaing 1j harnesses he didnt know so eh

 

[daneyan]

Hit up www.boomslang.us and they can make u a full plug and play harness for the emanage ultimate to plug up to any car. Just tell them what engine and harness u have and they'll make u one. It cost me $214 shipped from them and it plugs right up. all u have to do now is set the jumpers in your emanage but no more cutting and splicing of your harness or a patch harness. Here's a pic to show u what it looks like, one end connects to the emu and the patch is for your harness and ecu to plug into.

This harness is for emu into a jza70 harness and ecu.

 

[935motorsports]

There is no "us" 1jz. It will always be JDM.