Going to dyno tonight. I think it's a Mustang dyno. I will try to post results and Zt-2 datalogs tomorrow.
Dyno tonight
- Thread starter isnms
- Start date
Nice results. I won't get the data until late tomorrow or on Wednesday. His computer did what computers do...locked up, so I didn't get a print out on the spot. He is going to email the data to us later. It was actually a DynoJet. I think my numbers were respectable, beat a BMW and within a horse power of a Cobra, the old two seater, man did it sound nice though. I got 225hp and 228hp, iirc, on each run, but don't remember torque.
I will post my datalogs now and follow up with the dyno data later. I forgot to up the boost for my second run so both were done at ~9psi. These results are with the mods currently installed.
I will post my datalogs now and follow up with the dyno data later. I forgot to up the boost for my second run so both were done at ~9psi. These results are with the mods currently installed.
Gives me something to base/look forward to when I get my *have/waiting installation* mods done
Thanks. Since my turbo upgrade and larger ic, I keep hitting fuel cut somewhere around 11. Low 10psi is all I can safely run right now. I can't wait to get my other upgrades installed.
How's it going with your build up?
Check out Zeitronix web site. They have teamed up with Digital Tuning Inc. to make software for a Palm to datalog
I'm sending in my unit in a couple of weeks to get the upgrade done where you can select what you want to display - boost/tps/user. I contacted them and he told me it was a $20 +shipping upgrade. You have to send in both the display unit and control box.
How's it going with your build up?
Check out Zeitronix web site. They have teamed up with Digital Tuning Inc. to make software for a Palm to datalog
I'm sending in my unit in a couple of weeks to get the upgrade done where you can select what you want to display - boost/tps/user. I contacted them and he told me it was a $20 +shipping upgrade. You have to send in both the display unit and control box.
Dyno data, I'm also including the data files. If you go to http://www.dynojet.com you can download the viewer software Free
also included are screen shots of zt-2 datalog with cursor positioned at approximate point of max hp. torque peeks approximately where boost first peeks. i'll have to figure out later how best to synch the two.
also included are screen shots of zt-2 datalog with cursor positioned at approximate point of max hp. torque peeks approximately where boost first peeks. i'll have to figure out later how best to synch the two.
Attachments
Last edited: