dsm bpv on mkIII

[DaemoN]

I can't for the life of me find the write up on how to put a dsm bpv on the 7mgte. I think I have a leaky bpv and I have a dsm one handy that I want to try and put on while the car is getting the other stuff done to it. I know they don't like ~18psi or more very well, I won't be running that much. Thanks in advance.

 

[JDM 1JZ]

get a 1g(1st gen) dsm flange from www.extremepsi.com, cap off the stock bov locations put the vaccum line on and done, they also sell 1g flanges already welded up to a whatever degree pipe you need, not much on the site, best to call. hope that helps a little, if you research on www.dsmtuner.com as well you can "crush" the valve to hold more boost, lots of people run these as an alternative to greddys and big names, there just as good

oh yeah, if you want to recirculate the valve back into the system instead of venting to the atmosphere just find a line big enough to run from the valve to the intake like stock

 

[hottscennessey]

http://jblmk3.com/id19.htm

 

[DaemoN]

thanks!