If you do, can you help me? There is a little two pin plug, one wire is red I believe and the other wire is purple... Where does the purple wire go?
Do you have a Greddy Turbo Timer?
- Thread starter Reign_Maker
- Start date
This might help you.
http://www.greddy.com/img/PHP/products/pdf/685.pdf
Online manual for the turbo timer.
http://www.greddy.com/img/PHP/products/pdf/685.pdf
Online manual for the turbo timer.
Thank you Joe...
Ok, so it says its the speed signal wire... Now that wire was routed over to where my ecu is... Does anyone know which wire on the harness *pre89* is the "speed signal" wire?
Ok, so it says its the speed signal wire... Now that wire was routed over to where my ecu is... Does anyone know which wire on the harness *pre89* is the "speed signal" wire?
JSHeinrich
^ No more Supra ^
I would have to look tomorrow after work. I have one on my 87 and it works great I just cant remember where I wired it. What color wire are you looking for exactly?
JSHeinrich
^ No more Supra ^
Thanks... I just read another post from way back, and someone was saying that the speed sensor wire will give you a digital speed read out in kph...
JSHeinrich
^ No more Supra ^
Ok, well my purple wire is not hook up too anything. It work I just think I didn't care about the speed thingy. I just wanted the timer. Sorry I'm no help
JSHeinrich
^ No more Supra ^
JSHeinrich
^ No more Supra ^
OneJoeZee said:
thats the brown wire. The brown and purple are in a little extension thingy majiger together.
I just read through the last few replies.
JustAnotherVictim
Supramania Contributor
I just hooked up mine 2 days ago. The purple wire is the e-brake wire and the brown wire is the speed sensor wire. I am positive, because I tied up the brown wire and connected the purple to the e-brake switch and tested. It shuts the car off when the e-brake is dropped while the tt is keeping the car running.
JSHeinrich
^ No more Supra ^
The brown is definately for the e-brake.
The purple is the speed sensor. You don't need the purple for it to work. I think its a lot of work to get it to the speed sensor but I don't know for sure because I didn't do it.
The purple is the speed sensor. You don't need the purple for it to work. I think its a lot of work to get it to the speed sensor but I don't know for sure because I didn't do it.