damnit juss got rodknock after 3 days after build...

[slpyeyedspoolin]

i juss finished my build, only thing i didnt do which was retarded was not touch the bottom end....i juss got rodknock outa nowhere...like wtf....sooooooo im gonna replace the damn bearings and oil pumppp...now where do i get some basic bearings that'll come to me within a few days cuz its gettin cold out really fast n i wanna get this goin be4 the e-town meet....

 

[starscream5000]

If you don't have a mechanic check and machine the crank so he can tell you what size bearing you need to get, you'll just be right back where you are now .

 

[927mgtepat]

Only use Toyota Bearings, For some reason the 7M does not like aftermarket bearings. Use the # system to find out what bearing you need (their are 5 standard size bearings) and measure the rods, and the crank to figure out which ones you need

 

[slpyeyedspoolin]

but what about the clevitte 77's? i heard they were pretty sik...and that they come with that silicone coating to fill any scratches or whatever.....plus theyre only 60$ compared to the 94$ ones from toyota......cuz im completley dead broke from doing this swap and its my only car and its goota be driveable within a few days...

 

[wardog]

check with bigaaron from driftmotion he has the the clevitte bearings for the supra as a kit....talk to him he will do his best to accomodate your supras needs.....

 

[starscream5000]

The clevite 77's aren't aren't around anymore, it's a different brand (can't remember the name) packaged in the Clevite box. I think I remember IJ posting up about them, they should still be a pretty good brand to go with though.