ct26 swaps

[miggles]

Are there any turbo's (aftermarket) that can bolt onto the stock cast manifold,and using adapter plate/s and new oil lines and cooling lines.Does anyone know what the flange is that the turbo has(if it has)Im just curious as regarding the sr20's u can swap turbos around due to the same flange/s.

 

[mkIIIman089]

I believe that the flange on there is a toyota jobbie. So no normal size turbo not specifically intended will bolt up.

That being said, a couple come to mind right off the top of my head. Sound Peformance SP61GT, and Supra Sport BOSS series. Correct me if I'm wrong someone but SP has some other new bolt ons as well now right?

Heres an evolving flame fest with a couple good things in it on the SP61GT and boss from SF (gasp, flaming on SF? NO!) http://supraforums.com/forum/showthread.php?t=306746&page=1

 

[flubyux2]

the only other "bolt-On" turbos are from SP and Supra sport. the other Turbos that fit from toyota are from the 3SGTE and VVti 1JZGTE engines...

youre pretty much limted to "small" size turbos when retaining a stock manifold... you need something aftermarket or an adaptor plate to run Mid size turbos like 63mm and larger.

 

[Satan]

Hey guys....

I am looking at compressor housing options.... basically I have a 61 trim T4, aftermarket exhaust manifold, and the aftermarket CT-26 turbo elbow.

What I'd like to do is change the turbine housing of the turbo I have, so that it would meet up and fit the existing ct-26 elbow, and have the t4 flange to mate up w/the mnewanifold... using an external wastegate..... What're my options?

E

 

[rakkasan]

Heres an evolving flame fest with a couple good things in it on the SP61GT and boss from SF (gasp, flaming on SF? NO!) http://supraforums.com/forum/showthread.php?t=306746&page=1

That thread is the epitome of a typical Supraforums thread. It starts of with very good info, but ends up as a flame fest. I loathe that website for that very thread. I guess if you challenge yourself to read only the informative parts of a thread & disregard the pecker contests, you'd be ok....

 

[Satan]

I read that one on SF also... didn't find what I needed. basically want a T4 turbine housing with that would mate up with existing stock elbow. I actually am getting one of those SS elbow/downpipes and want to be able to just use it with this set up.