CPS...?

[Insidious Surmiser]

does it need to be adjusted at all?

 

[Insidious Surmiser]

^^^ referring to an engine swap... cps has been moved, I was wondering if it needed to be adjusted?

 

[Joel W.]

Yes, This is how you set your timing. You need to jumper the diag box when the car is warm and set the timing by moving the CPS to 10 degrees with a timing light, Once set, tighten the CPS and remove the jumper.

 

[jdub]

^^^ referring to an engine swap... cps has been moved, I was wondering if it needed to be adjusted?

That's how you set your timing...yes, it needs to be set per the TRSM. If it was removed, it must bee reinstalled correctly or the engine will run very crappy (if at all).

 

[Insidious Surmiser]

aight, i should be able to get that done tomorrow, or maybee this mornin... pullin an all nighter tryin to get this finished... damn jdm motors... so much is different on em :-/ even the coolant lines to the heater core are different... thanks for the info