compression ratio, Just curious

[queenskid926]

I'm curious to see how much of an effect does the right head gasket thickness has on the compression ratio.

Say if i had 9 thous machined off the head and block and still use the stock heasgasket, what would my new compression ratio be?

 

[suprahero]

Try this forumula out.
http://www.csgnetwork.com/compcalc.html

 

[tbcmorris]

Higher


Comp ratio equals volume at bdc devided by volume at tdc

 

[queenskid926]

Try this forumula out.
http://www.csgnetwork.com/compcalc.html

cool i tried searching for some of the required information.
I need the combustion chamber in CC's
and piston dome volume cc's for stock pistons

Thank you for the calculator suprahero, got the other info as well too?

 

[IJ.]

40cc

-19cc

Piston is 20 thou out of the hole at TDC

 

[queenskid926]

40cc

-19cc

Piston is 20 thou out of the hole at TDC

thank you IJ for the information.

 

[suprahero]

Thank you for the calculator suprahero, got the other info as well too?

40cc

-19cc

Piston is 20 thou out of the hole at TDC

I'm pretty sure he asked ME for that info Ian.........here it is QS.
40cc

-19cc

Piston is 20 thou out of the hole at TDC

thank you Jay for the information.

You're welcome. It really wasn't that hard to find, since all I had to do was copy and paste it from above..........:biglaugh:


Ian, please don't ban me.

 

[IJ.]

LOL Tard

 

[mastergrader007]

I just had 15 thou taken off my 7mgte head and used a stocker, havent checked my compression yet, but its been 1000km and its running like a top. no smoke and timing was still dead on. (hope i didnt just jinx myself!!!!):sarcasm: