Code 51!!!

[mhopemk3]

I swapped the auto tranny with a R154 and after I completed the job I get a code 51.. Didn't have it before and if I clear the codes it will come back as soon as I start the car.. I know what TSRM says. I have a new TPS that I put on before the swap so that should be ok.. I did not change out the ECU so I am wondering if that may be the problem.. I still have the Auto ECU!

Any Ideas??

 

[mcpcola]

no that is fine and you did jump the Neutral safety switch i take it. I have a auto wireing harness in a manual car running a manual ECU but the auto ecu works in the car also.

 

[rakkasan]

It's your TPS. Crack open your TRSM to the TPS section & check its' calibration.

 

[JustAnotherVictim]

It's your TPS. Crack open your TRSM to the TPS section & check its' calibration.

That's what I've found