clutch help!

[Godspeed]

ok in my 86.5 supe the clutch sticks to the floor and wont come up unless you pull it up. it still goes into gear but. the damn thing stays on the floor. i bought a new slave cylinder but it still stays on the floor. could it be that it was not bled right? or could there be other possibilities? let me know guys i havent ever encountered this one before.

 

[aye mate]

Check the fluid. Might just be low on fluid. Also might want to check the master cylinder.

 

[boost fiend]

could be a failur in the master. maybe even check the spring. sumthing has to be leaking. double check everything.

 

[Godspeed]

it has fluid. it now has new slave cylinder. whats the best way to check the master cylinder?

 

[87CandyBlueT]

I would try re-bleeding the slave cylinder. I had the same problem with my old mazda. After I replaced the slave cylinder I had to keep re-bleeding it until it finally got some pressure and stopped sticking to the floor and has worked great ever since. If you still have trouble with the clutch I would look into replacing the master cylinder, I'm not sure how to inspect your Master cylinder other than checking for leaks. Good Luck

 

[Godspeed]

ok thx guys ill see what i can do.