so im getting my supra sunday and i am gonna tear some of it apart and super detail everything. but with the engine im wondering, would it be ok to spray some degreaser everywhere and just spray it down? should i cover up the turbo and air box?
cleaning my engine bay?!?!
- Thread starter mk3_89turbo
- Start date
Cover all the electrics/connectors, and don't get any water down the center of the head. Other than that, spray away.
So many horror stories start right here. Leave the hood closed for now, and clean things up whenever you take the motor out, and have it apart. You'll get there, trust me.
^ when i cleaned my engine bay, i made sure that the cylinder head was covered (since my valve covers were cleann) and my alternator too, then took degreaser, and a pressure washer, did the job well 
but it would be better to clean when engine is out, there wouldnt be any having to cover things, well except for a few hoses and wire harnesses
but it would be better to clean when engine is out, there wouldnt be any having to cover things, well except for a few hoses and wire harnesses 
mk3_89turbo;1408083 said:
what i did was purple power and a presure washer but insted of spraing from the top of the engine to the bottom go to the bottom if the engine (under the car)... then spray on..try to comer the air box though
Just get a rag and some degreaser and clean away. If you have to, take some things out so you can get the parts of the body that show clean.