Can't find any shielded wire for my new harness.

[ifyouaint1sturlast]

So,
I'm making a new wire harness. I've already ordered all the pins, plugs, seals, wire, loom, heat shrink, etc.

I simply cannot find any suitable shielded wire.

I need dual conductor shielded for the crank and cam angle sensors (2JZ), and I need single conductor shielded for the knock sensors.


Can anyone help?

Thanks

 

[reeds420]

for the knock sensors i used RG59 cable that i got from a computer store and have had zero problems with it. as far as the dual conductor shielded wire I'm not sure. hope that helps

 

[ifyouaint1sturlast]

How many miles/how long has it been since you've done this?

 

[Devin LeBlanc]

Im running RG58 for the knock sensors, its the same that comes factory. Im running 18-4 for the crank sensor however im 7M so has four wires. It has to be 18-4 shielded ground, Or vise versa 18-2

 

[ifyouaint1sturlast]

Devin, I've sent you several PMs about your valve body services.. thanks for the advice about the wire though!