cams and turbo installed :)

[EvoLuTioN]

http://youtube.com/watch?v=HAHQ4jJyCt0

let me know what you think
i have a exhaust leak and besides that it doesnt lope that bad once it's all warmed up

http://youtube.com/watch?v=Sq9668xc5R4

here's a little test run at 13psi and 91 octane

 

[91T breezen']

Sounds like it means business!:evil2: Would get my attention, even in another less attractive car than the Supra.

 

[daneyan]

what cams are those? sounds pretty nice besides the exhaust leak. doesn't lope to bad at all

 

[gilberjj]

wow, thats lopey. i hope you're going to rev to at least 8k!

 

[NashMan]

sounds like the cam need to be ajusted to much loep = to much lag

 

[EvoLuTioN]

eh? how should i go about doing that? how many degrees? stilll learning

 

[NashMan]

oh ummmmm read the card that came with it and ajust the cam timing acordingly

or do it the long lost puppy way and just them at starting at stock based timing

you may ahve to do the long lost puppy root cause not many peoapl have tools but you cna rent them in some places

 

[EvoLuTioN]

if only i understood the card 100%

-1.0ATDC
-9.0BTDC
39.0ABDC
47.0BBDC
lobe separation 114*

i'm guessing i need to retard the intake by 1 degree and exhuast by 9, correct me if i'm wrong

 

[AGlobalThreat]

The car sounds sick, that's a nice looking turbo and engine bay. I don't believe you want to retard the exhaust by 9 degrees, that's pretty extreme, but I'll wait for someone else to jump in.

 

[gilberjj]

The car sounds sick, that's a nice looking turbo and engine bay. I don't believe you want to retard the exhaust by 9 degrees, that's pretty extreme, but I'll wait for someone else to jump in.

wait....... whos retarded :icon_conf

 

[EvoLuTioN]

yeah I'm hoping for someones input on retarding or advancing the timing

 

[AGlobalThreat]

What turbo is that and what size cams did you put in? Have you driven it on the street and boosted it yet? I want a vid of that lol.

 

[EvoLuTioN]

check the first post, at the end i posted a link =)

 

[suprahero]

Are those the BC 272 small core cams from Zazzn?

 

[EvoLuTioN]

crower 272s from a previous supraforums GB

 

[Zazzn]

they are the original crower 272 small core cams.
I have the same sorta GB going on here in the GB section.

Car is sick dude what size turbo looks like a 71 or 74 or somethign huge like that...

As for degreeing the cams, i saw it done on the twins turbo bulid of a 1000HP supra, honestly them cams non degreed run great. I don't think it's as bad as it sounds guys. Are you pulling -10-12 vac? if so you should be fine... More over how does it feel on the top end?

 

[Big Wang Bandit]

Damn, It hasn't fallen apart yet?

jkjk

Damn, gimme a ride next time!!!

 

[EvoLuTioN]

they are the original crower 272 small core cams.
I have the same sorta GB going on here in the GB section.

Car is sick dude what size turbo looks like a 71 or 74 or somethign huge like that...

As for degreeing the cams, i saw it done on the twins turbo bulid of a 1000HP supra, honestly them cams non degreed run great. I don't think it's as bad as it sounds guys. Are you pulling -10-12 vac? if so you should be fine... More over how does it feel on the top end?

right on, and it's a SP74HO turbo =)

I want to retard the timing a little bit, but I never messed with timing before, so I'm scared to mess anything up. For vac i'm pulling about -18 - -20

for the top end, it's unbelievable, before power drops off around 6800, now i pull all the way till rev limiter (accident) but at least I know now. Just imagine if I had springs and retainers with this :naughty: