Cam Timing Whoops

[Admiral Jedi]

Slight problem and I need some help.

The marks I made on my timing belt were wiped off and I can't find them.

If the #1 piston is at TDC, how can I align my cams correctly?

Can I use the factory marks on my cam sprockets?

 

[isnms]

yes - http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EM&P=29

 

[gofastgeorge]

Make sure you have 18 belt teeth between the marks on the cam sprockets.
And if #1 is on TDC, and both cam marks nearly strait up,
you will be fine.

 

[AJ'S 88NA]

^^And the crank pulley on the mark and the rotor pointing at the #1 wire

 

[IJ.]

And that the Balancer marks actually line up at TDC once fitted.
(they slip on the hub)

 

[Admiral Jedi]

You guys are awesome! Thank you so much!