Broken Temp Clip

[SupraStoked]

Noticed that this clip was broken. Its the one that sits on the very top sensor on the water neck. I just need to know what orientation the black and green wire go in the clip with. Using the marked side of the clip (pictured below), can someone tell me what order the wires go in from left to right?

(Use this pic as reference)
View attachment 67386

Heres a pic to show how it broke :'(
View attachment 67387

 

[jetjock]

Can't open the pix but if you're referring to the cold start injector thermal time switch the information is in the TEWD.

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=38

And on the following page:

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=39

 

[SupraStoked]

Heres the pic, sorry it never uploaded.

 

[Nick M]

The wire and pin location is still in the EWD that jetjock linked.

 

[jarheal]

I had the same problem, got one from ebay

 

[SupraStoked]

What was the item called on ebay?