auto trans electrical question

[gixxer750]

alright, I've got an 89 turbo now with an auto. the previous idiot...owner, somehow managed to pull one of the plugs off during his engine pull. Sooo... Now I've got three hanging wires.

The wires that go to the soleniods are the broken ones. Colors are yellow, black and white solid color wires. I need to know what wires they go to in the six pin rectangular plug that only has five wires in it. I have both round plugs pluged in and the square four pin plug. I just need to know what this one does....


Thanks much

 

[gixxer750]

Help.....

What happens if I run it with these wires disconected? It won't shift?

I just finished a rebuild on this thing and this is all I lack to drive it

 

[tookwik4u89]

Black and yellow are for abs speed sensor on 4 pin G connector, I dont see white. Not sure if I'm on same page , see what you make of it.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?Section=Main&Page=106

 

[gixxer750]

Wrong connector.

What I have discovered after a few hours of searching

On transmission side of plug

no. 1 solenoid black (back solenoid)
no.2 Solenoid white(middle solenoid
no. 3 solenoid(lockup) yellow(front solenoid)

 

[gixxer750]

Found it, thanks for the help and the link.

no1 solenoid - green/black
no2..... - green/yellow
lockup - red/black

 

[tookwik4u89]

Doh, I just crawled under my car and you already got it.
Wait, I have:
yellow to red w/ black
black to green w/ yellow
white to green w/black
black and white opposite what you just said

 

[gixxer750]

are you sure?