Anybody have a good picture of the Stock fuel lines?

[ForcedTorque]

I have previously upgraded my fuel system, but now have gone back to basically stock, with a Walbro pump. So, it has been quite a while since I have even seen how the stock system goes back together. To further complicate things, I have no idea what each piece is called. A good clear picture will help me see where things should go, and possibly tell me if I am missing something. It certainly appears to me that I might be.

 

[hvyman]

This help?

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=2211&P=2

 

[ForcedTorque]

Thank you very much for that picture! I had just searched through about 100 pages of Cygnus before posting this. However, as I suspected, I wouldn't be able to figure much out in the TSRM cartoon style pictures. My suspect area involves part# 23849A, and it's mounting point. I have no idea where it mounts, and can't see it in there either. I currently have it just hanging free, and it has my incoming fuel line bent at almost 90 degrees. I suspect this could be causing my problems, not being able to rev or stay running.

 

[hvyman]

It bolts to the motor mount bracket iirc. Or somewhere right there.

 

[ForcedTorque]

I thought so too, but couldn't get it to do right while hooked up. From looking at the picture, it looks like I may have it installed upside down on the lines. I'll be checking that out tomorrow evening when I have light again. Thanks for your help. I see you helping in quite a few peoples threads lately.

 

[hvyman]

Ya ive had a lot of time on my hands lol.