Another Maft Pro up and running..

[mhopemk3]

Well I am up and running and man it feels GREAT!!! Has been down a couple of months and now I am on the road again.. I LOVE THIS CAR!!!

I do have a quick ?? on the tune..

My idle AFR is right at 14.7 :icon_bigg
when i rev it my AFR's go to 10 or so and blows the black cloud..

How can I tune this out??

Running MAFT Pro Speed/Density

 

[Doward]

I'd look for whatever the MAFTPro uses that's TPS vs AE% (accelerator enrichment)

Might be called 'Tip In' or something.

Dammit, I need to get one of these things :3d_frown:

 

[mhopemk3]

I'd look for whatever the MAFTPro uses that's TPS vs AE% (accelerator enrichment)

Might be called 'Tip In' or something.

Dammit, I need to get one of these things :3d_frown:

I would agree.. This unit kicks A$$. I know nothing about tuning. (Why I have the issue) but I want to learn.. After these mods the car sounds and feels great. I am going to have to record an in car video and post it up!!

 

[dbsupra90]

I'd look for whatever the MAFTPro uses that's TPS vs AE% (accelerator enrichment)

Might be called 'Tip In' or something.

Dammit, I need to get one of these things :3d_frown:

yes.

TPS1 - Amount of enrichment that occurs on a throttle transition ("tip-in").
TPS2 - Rate that the TPS enrichment is applied and removed.
TPS3 - not used
TPS4 - not used
MAP1 - Amount of enrichment that occurs on a positive MAP sensor change ("tip-in").
MAP2 - Rate that the MAP enrichment is applied and removed

 

[mhopemk3]

Now that helps!! Thanks...

I will give it a shot...