About to get a mk3

[dakota24]

I am about to get a 1990 mk3 supra and am going to have it wrapped in a matte blue vinyl but dont know a good set of wheels for it. I was thinking about a nice deep dish 5 spoke wheel preferably the factory 16" size I was thinking 16x9 in the front 16x10 in the rear but also dont know if that will fit.

What wheels would you all suggest with a matte blue wrap??

I am looking for more low price wheels( rota or drag stuff like that ) nothing to expensive (volk)

 

[BryanDyer]

varrstoen es1 hyper black
18x9.5 in the front
18x10.5 in the back
it'll sexy af

 

[BryanDyer]

price is very reasonable too
you may also like their 5 spokes

 

[dakota24]

Would you go up in size I was also going to stick with 16s because the guy just put new tires on them

 

[BryanDyer]

would I go up in size in what?

 

[dakota24]

I was looking at something like konig ssm but they were 18s

 

[dakota24]

The mk3 i am looking at has factory 16s would you go up to 18s or stay 16s

 

[BryanDyer]

I'd get 18s or 17s
especially if you want a lower profile tire
it's all personal preference
I have enkie rpo3
17x8 in the front
17x9.5 in the back

 

[91Supra313]

Some quick advice, don't get the car wrapped. If a piece of the vinyl tears or gets ruined, you will have to redo the entire panel.....which over time will cost as much as a paint job. Do what I am going to do in the next few months....Dip it. Then if a piece gets scratched, you can repair it, and if you don't like the color, then you can peel it off and respray it whatever you want. Plus you don't have to worry about air bubbles.

 

[dakota24]

I was going to have it wrapped proffesionally and the guy guarantees it for 5 years and I may go with some 17s but what are some nice 5 spoke

 

[BryanDyer]

enkie rpo3 like what I have
even though it's wrapped professionally doesn't 100% gaurantee nothing will happen bubble up or tear

 

[91Supra313]

Hence the reason I am dipping mine. Also if you want some 19s, the ones that you see in my avatar..... some curb rash, rubber included. I would have them refurbished. I am running 17" Work Meister right now. The 19s are Inovit. Discontinued wheels from the UK.

 

[BryanDyer]

there are many options for wheels out there even on the cheap side
just get something you like and are happy with for your car

 

[dakota24]

The car now is a two tone burnt orange to the windows and black below i havent got it yet but am trading a four wheeler for it it has a 7m-gte in it with auto tranny but comes with another inline 6 ( looks like 1jz-gte) and a 5 speed tranny

The color is what i dont like and a paint job is too expensive the wrap was going to be 800$ and i dont like the plastidip option

For the wheel situation i have a 2012 tc and have just looked at 18s so i dont know many smaller wheels i have seen alot of mk3's with 5spoke wheels and they look good but i want something with a big lip and dont know of many 5spoke with a big lip

 

[91Supra313]

The plasti dip would save you $2-300 but if you are set on a wrap job, go for it. Those look great as long as they are done right. My 19s have a hell of a lip on the rear.

 

[BryanDyer]

personally, I like wheels other a big polished lip and mesh in the middle

 

[dakota24]

I would love to get a set of bbs or esm for it but i guess i will have to see the car abd compare wheels on it before i decide

 

[BryanDyer]

get varrstoens
the es1 are a mesh wheel
you may need spacers and fenders rolled for them t fit though
but if you like the bbs look the varrstoens you'll like

 

[dakota24]

Would a 10 inch fit in front and a 12 inch in back or is that too big

 

[dakota24]

I found a staggered set of rota p45r 18x10 and 18x12 is that too big