A Pillar Pod Wiring

[NDBoost]

How did you guys go about running the wire for your a-pillar pod gauges? Im trying to find a way to do it without removing the friggin dash and make it look nice.

Ive got Boost and Narrowband A/F

 

[bigal0043]

i slid my wires next to the dash there was a gap where the old molding came out and i didnt have to pull my dash or hardly and of my interior peices

 

[NDBoost]

you mean down along the side of the door? where the kick panel piece comes up and covers the trim of the door sill? I was thinking about running it along down the a pillar underneath the trim piece and down under the dash through the firewall and out into the engine bay.

I could drill a hole into the a pillar but i dont really want to.

 

[MA717MGTE]

i fed my af, pyro and boost through the crack had the cluster out, ran wires beihind it to the glove box region where the connections were made up and or feed outside to the engine bay

 

[bigal0043]

hmm how do i explain this.... where the bottom of the pillar touches the dash it kinda slids in there... the pod that i had space for me to run the wire through that spot and then from there it would slid down like near the fuse box and stuff... then i had to put a hole in the firewall i couldnt find a hold already

 

[NDBoost]

thats not a bad idea, my current old boost gauge is mounted on the steering column i fed my boost line through the drivers side hole and tapped right into that line for the stock Boost gauge. i wanted to run the wiring through that same hole if possible.

Anyone have any pictures of their setups and wiring?

edit:
bigal i dont have a full a pillar its just a crappy little 2 pod one that is held on with stick tape/and/or screws. I got it free with the gauges so im going to use this until i get enough $$ for the real thing

 

[bigal0043]

my car is at my house and undearneath a car cover... if no one can get u pics i will be able to on saturday... my dash is all apart at the moment because i am changing the cluster gauges

 

[MA717MGTE]

if i do get pix it will be after moday.. really dont feel like taking out the cluster lol.

 

[NDBoost]

if i do get pix it will be after moday.. really dont feel like taking out the cluster lol.

oh no no i dont want you guys to go through the troubles of taking pics of all that crap if you havent already.

Im sitting at work with the a-pillar in my car. I sat in the car for a good 10min at lunch trying to imagine how im going to do it, just wanted some extra input. Besides im installing it the minute i get home tonight. Ive been drivign around since last night with it kinda fastened to the pillar getting a feel for how its going to look etc.

But if anyone already has pics that would be cool to post em up :naughty: