88' N/A-T Swap

[fiyota]

Short video I put together today of my 88 n/a-t... I did this video for two reasons; first, I wanted to have some videos to watch over the winter now that it's in storage, and second, I wanted to show you guys how it sounded!

The car has a 3" DP back exhaust that was custom made, using only 1 slight bend, to a 3" in/out dynomax race muffler. Still running the stock turbo elbow and half the downpipe, and the stock ct26. Wastegate has been shimmed to 10psi, and it has the stock n/a 4.30 lsd in the back... what do you think?

Mk3 N/A T Sound

I made the music in the vid fairly quiet compared to the audio from the actual footage, so you should be able to hear it fairly well. But if you would like a short vid of the rear revving without music I can upload one.

 

[Silent Deatz]

Was it cold or BHG? A lot smoke comes from ya exhaust. But nice vid

 

[woodytsi]

sounds nice
woodytsi

 

[Mk3runner]

revving vid request. sounds good man, cool beans.

 

[gtsfirefighter]

Was it cold or BHG? A lot smoke comes from ya exhaust. But nice vid

It looked like it was cold.


I swear I could hear the sweet sound of spool in parts of your video. I can't wait till my swap is done.

 

[BlackMKIII]

OMG I want my car back.

Supra Sexy Time! :bigthumb:

 

[CTsupra]

Love the part where you really get on it and the boost pushes the camera back!

 

[SupaMan]

nice car man i miss boost

if you take your camera and sandwhich it between the head and back rest on the passenger seat angled toward you it makes for a good in car camera spot, thats if your camera size allows it.

 

[fiyota]

Nah, no blown headgasket... brand new engine (new toyota pistons, reground crank, new cams, new valvetrain etc etc).... has about 10,000km on it now. It was just a cold day, the engine had been idling for about 15 minutes, still lots of condensation tho, it was well below freezing with no cats or resonators in the exhaust.

Here's a link to just the sound of the car for those that are interested..

Exhaust Video

And yes, you can hear turbo spool :evil2:

Exhaust is as straight as I could possibly get it... 1 slight bend (you can see that in the first vid).. now I just need to get a BIC 3" ddp and you should really hear that turbo spool!

 

[MK3Brent]

Fack the fadeaway....