hey everyone, getting down to the final stuff on my motor so i can start her back up. i have a couple clips that i cant seem to find a match for. some help would be greatly appreciated!!!!
7mgte wiring help
- Thread starter mikehall05
- Start date
Is the pump in the washer fluid reservoir hooked up?
That first plug almost looks to me like it should be in the fuse box. That's my input.
That first plug almost looks to me like it should be in the fuse box. That's my input.
I think the first plug goes to the body harness connector on the engine harness.. Don't quote me though.
The second plug i'm pretty sure is the cold start injector temp switch (on the water neck)
No idea on the third.
The second plug i'm pretty sure is the cold start injector temp switch (on the water neck)
No idea on the third.
1st one I don't believe gets used.
2nd one looks like a/c if it's on the body harness.
3rd on what's the location.
2nd one looks like a/c if it's on the body harness.
3rd on what's the location.
Looks like a plug for the a/c. There 2 sensors on the ac lines going down the frame rail. You can see one in that pic.