7mgte engine swap- how to?

M

mike87

New Member
Sep 2, 2012
7
0
0
Dayton ohio
I have have an n/a 87 supra.. I move to AZ and 2 weeks later I had a BHG.. Instead of getting rid of the car I decided to do a swap. I bought a 7mgte.. This is the first swap I've ever done.. With what little knowledge I have, I've pulled out the 7mge and replaced it with the turbo engine and harness. Ive connected as much of the harness as i could.. I've also mounted the trans and will be putting in my one piece driveshaft again.. ive also replaced the n/a cluster with a turbo one.. now that you have the back story-
My issue is what do I do now? Call me what you want but I'm seriously lost on how to finish this swap.. I've gone through site after site looking for answers or a how to guide to help me along.. I know I'm close to being finished I just don't know what to do now.. can anyone help?
 
D

Dan_Gyoba

Turbo Swapper
Aug 9, 2007
1,836
0
0
Alberta
www.gyoba.com
It's not that difficult a swap. If you've swapped over the engine and harness, what else? You also need the ignitor, and injector resistor pack for electronics. An intercooler and piping, possibly the oil cooler as well. Your exhaust from the cat back can stay, though you'll want to upgrade it eventually.
 
You must log in or register to reply here.
Top Bottom