7m performance

[faithless88]

How hard is it to get 500whp from a 7m? Then how hard for a 1jz for same amount of power? And finally 2jz?

Also what would ballpark figures be to get to that power on each motor?

 

[Fletch124]

500rwhp 7m your going to need to rebuild the motor with strong bearings, nice pistons, maybe rods, ARP everywere, MHG, and everything needs to be machined and balanced, and a big turbo! Of course thats if you want it to last.

500rwhp 1JZ probably just a big turbo with all the supporting mods.

500rwhp 2JZ, why only 500rwhp? Its a 2jz.

 

[MRSUPRA]

Not hard at all. Its all in the turbo..

 

[madsupra88]

heads/cam/turbo/ rods/pistons/fuel system/exhaust/IC

 

[Syris]

head/cam/turbo/ rods/pistons/fuel system/exhaust/IC

Fixed for ya

 

[Boost Lee]

From an engine standpoint, not hard at all.

Key is money, time & patience.

Realistically, assuming all your moving parts are healthy, you don't need to touch your motor internally. There are plenty of people on the boards putting down 500+ with head/block machining, MHG, ARP's, lots of boost and lots of fuel.

But on the other end...Once you get into this type of power, you'll want more...So why not go full-build?

-Jeff

 

[madsupra88]

Fixed for ya

Lol i just realized that. thnx

 

[faithless88]

I was starting to think of blueprinting the entire thing. But utlimatley it all depends on the car I get and how much work I need done to it.

Also was looking around and found these 2 sites:
Almost at the bottom
middle of list