2jz Engine Diagnostic Wiring

[LilRedSupra]

Alright guys, I'm in the dark about the engine diagnostic wiring on the big gray junction block on the aristo 2jzgte body wiring harness. What is the correct thing to do with this wiring? Please help

Thanks
Greg SMith

 

[Dr Tweak]

I've been meaning to write a step by step guide on that, so here you go!

Step 1: Go to http://www.phoenixtuning.com/wiring/packingslip.html and hit "Print"
Step 2: Fill out the order form completely
Step 3: Pack your 2JZ harness and your original engine harness into the smallest box possible and ship it to the address on the order form (don't forget to send money! )
Step 4: Receive plug and play harness back
Step 5: Plug it in and start it up!!!

-Doc

 

[bluemkiii]

I've been meaning to write a step by step guide on that, so here you go!

Step 1: Go to http://www.phoenixtuning.com/wiring/packingslip.html and hit "Print"
Step 2: Fill out the order form completely
Step 3: Pack your 2JZ harness and your original engine harness into the smallest box possible and ship it to the address on the order form (don't forget to send money! )
Step 4: Receive plug and play harness back
Step 5: Plug it in and start it up!!!

-Doc

Thats it?!?!:aigo:wow thats easy:biglaugh:

 

[SupraMario]

Thats it?!?!:aigo:wow thats easy:biglaugh:

Nope its actually easier than that.
I did an NA to 2jzgte swap, I got the harness back in like 1 1/2 weeks, plugged it in and turned it on...started up on 3rd try, but only because I did the wiring for the fuel pump, which has nothing to do with the harness.

The good DoC will save you time, money and headaches...believe me.

 

[tissimo]

I've been meaning to write a step by step guide on that, so here you go!

Step 1: Go to http://www.phoenixtuning.com/wiring/packingslip.html and hit "Print"
Step 2: Fill out the order form completely
Step 3: Pack your 2JZ harness and your original engine harness into the smallest box possible and ship it to the address on the order form (don't forget to send money! )
Step 4: Receive plug and play harness back
Step 5: Plug it in and start it up!!!

-Doc

Wow, a very helpful user on this board. :icon_roll

I sent you a PM, but Te1(pin 19) and Te2(pin 20) connect from the ecu 'A' connector to IK1-E7(Te1) and IK1-F4 (Te2).

http://i129.photobucket.com/albums/p227/tissimo91t/Misc/Aristo Wiring/DSC_0086.jpg for aristo big body connector labeling.

 

[LilRedSupra]

Wow, a very helpful user on this board. :icon_roll

I sent you a PM, but Te1(pin 19) and Te2(pin 20) connect from the ecu 'A' connector to IK1-E7(Te1) and IK1-F4 (Te2).

http://i129.photobucket.com/albums/p227/tissimo91t/Misc/Aristo Wiring/DSC_0086.jpg for aristo big body connector labeling.

Thanks Justin for the help.:icon_bigg