1JZ Spark Plugs

2

2Fast4U

New Member
May 3, 2015
4
0
0
Beit Shemesh
1JZ spark plugs
Hello,

my name is Idan and i'm from Israel.
i have a BMW E36 with 1JZ 2.5L twin turbo.
885773_10203917899338891_5867002294914727132_o.jpg

i'm now on service to the engien, and i want to know the right plug by NGK that will fit my engien 100%
20150426172850_1.jpg

i read alots of posts and i didnt got the definite answer, the only plug i found that will fit is the BCPR6EIX bat i dont know if it the right one for me.

i'm very close to stock without hard modifications, some info that maybe will help:
HKS intake filter
HKS exsuast
Israel is a worm cuntry 30*-40* in the summer
boost 0.4-0.7 bar

thanks for any help and light you can throw on this post.

Idan.
 
f00g00

f00g00

Supramania Contributor
Jul 2, 2007
586
0
16
Kuwait
http://www.ngk.com/Automotive-NGK-c1411.aspx
Any 2J plug will work. Coppers are fine and cheaper than iridium but you will have to change them more often. Gap should be about .028 inches or .7mm for copper. Iridium's are delicate so it is Not advisable to try and set them, just checking the gap can break the iridium tip off. If you ever decide to upgrade from the stock twins you should go a step colder for higher boost and replace the 6 in the NGK part numbers with a 7.
 
f00g00

f00g00

Supramania Contributor
Jul 2, 2007
586
0
16
Kuwait
That part number is for the 7M engine, it is slightly different than the 2J plug in the gap and Overall Height. As it is slightly longer you might have fitment issues under the coil pack, it does have a closer gap though.
 
You must log in or register to reply here.
Top Bottom