1JZ-GTE wiring for MK3 swap

[1jzmk387]

Hey Guys,

I was wondering if anyone had a list of the wiring mods needed for a 1JZ-GTE into a 86.5 Mk3. I looked around various posts and found some info referring to links but they appear not to work , maybe outdated. I extended the harness but not sure what I need to do to make her happy at this point.

New to the forum so thanks in advance.

-James

 

[S.A. supra]

What kind of 1jz?

 

[1jzmk387]

Hey S.A,

JDM motor out of a supra.

Thanks for helping.

-James

 

[S.A. supra]

Jza70? I have print outs but I can't find the site I printed them from. It was something like 92 supra nl?? It had info on both pre89 and 89+ supras.

 

[S.A. supra]

Bottom left has all the pin outs and plugs you need just make sure you are looking at the pre 89 plugs.
http://web.archive.org/web/20051227112114/www.1jz-gte.us/92Supra6.html

 

[Dirgle]

This is the 1JZ Swap bible. It's a collection of a information pertaining to the swap. It's not a hand holding guide to the swap, so you'll have to sift through for the info you need, but it should help. I picked this up from azsupracenteral.com, though I'm not sure who originally created it, otherwise I would credit them.

https://drive.google.com/file/d/0B7wyS1LQJU01bWFqUzJxeXV1X1E/edit?usp=sharing

 

[1jzmk387]

Thanks so much really appreciate it guys.....

 

[hvyman]

you already extended it but really you could have cut a hole and routed it through the dash with extending it.

Ive also found that just verifying with a dmm what wires actually go where to be the easiest way to figure out whats what. But to each ther own.