swap

hey guys, just got my 1JZ into my 240. it starts up and idle perfect but as soon as i touch the throttle it just bogs out and stumbles until comes back to normal idle. ive already check crank sensor, cam sensors, test and adjust my TPS. After adjusting my TPS it would even start until i loosen...

Where do I start...I swapped a 1jz in my 1989 supra 6 years ago and I used it as a DD for 4 of those years. Last year I had two problems with the car a idling issue and a clutch issue. Long story short my 1jz had developed crankwalk. I pulled the engine and confirmed the crankwalk. I picked up a...

Im in the process of swaping a turbo motor and tranny into my na car. I went to push my clutch pedal down and my clutch wouldnt fully disengage. I know this because when i had it in first and the clutch pedal to the floor, the back wheels would be stupid hard to move. Also i couldnt get into any...

In the process of repairing a hybrid 1992 2jzge/pre89 body harness and some information escapes me. pin numbers known on C1 but their terminations are important to me. 1. White ---------------------- goes to something related to hazard,horns,turnsignals ? 2. Black and yellow ---------...

Hey guys, i'm JJB from Steinbach Manitoba Canada. This is my mk3 that i have not driven in 3 years! I completely melted down my fully built 7m 3 years ago and its just been sitting since then. I pulled the motor last summer and took it to a machine shop and found out the pistons were...

Greetings from Wisconsin everyone. Now that is finally starting to warm up I can start working on the supra. It all started in January when I saw a local Facebook ad of a 1990 Toyota supra turbo roller. As a roller obviously it didn't come with an engine, Trans or driveshaft. The car itself I...

1 I've been given too many tickets on the highway for speeding.. but id like to enjoy the car ive built and try to be more responsible this year. I have looked through all the resources i can find on the cruise control system but without much knowledge of what im looking at i cant deduce if...

With all the talk about digital dashes and how everyone else in the world gets them but us in the States, this should hopefully turn out to be a good thread. A couple months ago, I, like many others before me, decided to attempt the project on my own. My goals with this were to find a way to...

2JZGTE ENGINE WITH HARNESS AND ECU, US DM R154 TRANSMISSION (NEEDS SHIFTER), JDM BELL HOUSING, SPEC FLY WHEEL WITH ARP HARDWARE, ACT TS2XTG6 CLUTCH seller wants 3500 obo

so right now i am doing a full engine/tranny swap on my RHD 1990 Supra it had the 1g-gte in it before with w58 tranny and im putting in the 1jzgte VVti with R154 tranny and right now where i am sitting is the shifter doesnt line up because the r154 is longer by like an inch and i really dont...

Maybe it’s time I made a build/progress thread for my new(est) Supra that’s come into my possession. I’ve been into Supras for quite some time, but I don’t think I’m particularly well known around the forums. A little background about myself to start: I bought my first Supra in April of 2006...

Hey guys, I'm in the process of swapping my 1GGTE out for a 1JZGTE vvti, I know about the engine and stuff and how it's not the best for tuning etc, but I'm not worried about that. I'm putting this into my 1990 mk3 supra RHD I have everything to do swap it came with ecu, uncut harness r154...

There is a guy over here in the Atlanta area selling a 1JZ block, 2JZ head, and a 2JZ ECU etc.. Basically everything needed for a 1JZ/2JZ frankenmotor MK3. But my question is are any of you guys running this swap, and have you heard of running a 1JZ with a 2JZ ECU? And for you 1JZ and 2JZ...

http://www.ebay.com/itm/CXRacing-New-Turbo-Manifold-98-05-IS300-2JZGTE-2JZ-GTE-Swap-T4-11-Gauge-/160895509226?pt=Motors_Car_Truck_Parts_Accessories&hash=item25761ea2ea&vxp=mtr the above manifold is the cheapest well built looking single turbo swap manifold that i have found for the 2jz-gte...

Looking for a 7MGTE complete engine, anyone selling or point me to a good place where i can find one? Thnx

So i pulled an auto Cressida motor from i think a 91 cressida and im putting it into my 1990 mkiii. Ive changed the mounts and the intake and throttle body and a few other things so it matches up. what else doi need to change? and im having some problems fitting the tranz on? i took off the auto...

1986 mk3 with a 1992 sc300 2jzge motor. The engine harness and ecu is a all from the lexus. the body harness is still the original supra harness from 1986. im putting a aem ems on the 2jzge and bolting on a turbo. So this turbo should have a turbo timer correct? I have been looking at the...

I recently got a 1991 supra turbo and the motor ceased up. I am swapping out the engine for a 1jzgte vvt-i. My mechanic said all I need to get is the engine because my other parts will hook right up. I just want somebody to look at the link I'm purchasing the engine from and tell me if it's...

Hey guys, so after a 2 year absence in the supra buzz i jumped back into my swap. So after a few late nights I got a good amount of the parts installed BUT I NEED HELP. I have open ended hoses with absolutely no clue in where they should be routed. I've studied the tsrm and used search for...

Hey, I have had my MK3 for some time now and I recently bought the 1JZGTE for it. I have the old 7MGE out and the 1JZ is on a stand in my garage. I was looking to find a group of people in the NJ area that can come over and help me get this project finished. I already have most of the parts...