clutch

As the title states I'm getting ready to change the clutch out on my 87 Supra N/A with a W58. I'm getting clunks and shuddering from the original so I figured it's time. I want to make sure I have all the parts ready since, for this project, I will not be doing the work myself. I assume the...

Im in the process of swaping a turbo motor and tranny into my na car. I went to push my clutch pedal down and my clutch wouldnt fully disengage. I know this because when i had it in first and the clutch pedal to the floor, the back wheels would be stupid hard to move. Also i couldnt get into any...

87 Mk3 Supra, built 7mgte I went on Dyno last october. Made 340 lbs torque at 4500 rpm. Above that, clutch slips...(spec stage 3...) Motor is strong, has everything it needs. This winter I'm making sure this won't happen again. Dyno guy offer me Competion clutch Stage 4. First question...

ok so ive tryed finding info on how to change a clutch in a mk3 with a 7m turbo and i havent found much so i was wondering if anyone had a break down on how to do it. i have all the bellhousing bolts and starter bolts out i have the slave and fork out and all the wires out and i cant get the...

so ive searched all over and the only place I seem to be able to find this kit is on driftmotions I was curious if theres anywere else I could get it from???

About 6 months ago i bought a 1987 supra turbo off a guy for $750. it had a new motor but everything needed to be assembled. after about ~$1500 later i got everything good and running.…i moved it across the yard and parked it. I tried to move it again and when i push the clutch in, it makes a...

When I purchased the Supra I went out and bought an engine gasket set, water pump, and clutch cover, plate and bearing from the local imported parts store. The total cost was $254 for the stock Jap replacement pressure place, disk and throw-out bearing.. After deciding to keep and improve the...

My Supra is probably at about 300HP (give or take) right now, and I am not likely to go above 350-400 anytime in the near future. Here are some clutch kits I've found. I've heard several members say they've had good experience with the South Bend Stage 1 kit. Anyone have experience with...

Hi there I haven't been able to find anything at all on the net relating to this rather unique problem so decided to post a thread. Pretty much i'll start the saga from the beginning: I had just recently rebuilt the engine on my supra and she was running mint, no strange noises just smooth...

So I have a 89 turbo with new r154 fidanza flywheel exedy clutch master cylinder and lines. All new about 5 months ago. The slave went out over the winter (storage) and I put a new factory slave one and bleed it about 20 times. I can see it moving the clutch in and out but still won't let me go...

1986.5 supra 7mge now going to 2jz w58 to r154 i know these are different -flywheel -clutch ass. -bell housing -slave -DS but are these parts able to swap to r154? -Clutch master (W58) -clutch hard line (w58) -crossmember (w58) thanks