2jzge

Hello, new to the forums. just got a 2jz he vvti NA dropped in my 88 supra, last step is wiring. I’ve seen people splice and i was wondering if anyone has a link or a proper wiring diagram to go off of thanks

Looking for a 2jzge cylinder head in good shape that makes good compression.

In the process of repairing a hybrid 1992 2jzge/pre89 body harness and some information escapes me. pin numbers known on C1 but their terminations are important to me. 1. White ---------------------- goes to something related to hazard,horns,turnsignals ? 2. Black and yellow ---------...

Just some background info: Swapping a 2jzge into a mk3 supra using 7MGTE electronics. So far I've swapped over the necessary sensors (knock, coolant, etc.). Moving onto the ignition setup, I have the IS300 coil packs and vvti igniter. But from what I've seen, if I use the vvti igniter...

Currentally have a 400lph e85 walbro intank on a stock system. looking to try out e85 and aem flex fuel update and shoot for something in the low 600whp. So here is what im thinking The Injectors I used a injector size calculator online and came up with 1500cc @ 80%DC The Fuel line The...

Theres a lexus 2jzge vvti out of a 03 is300 for sale locally. and im very interested into doing a swap in my 88 supra . I was just wondering if this would be possible to achieve. I have not seen anyone with that setup and im kinda confused on why because you can get these engines very cheap.

BACKGROUND; I have had an 88 Mk3 supra in my garage for 4yrs. I blew out the original engine which was a 7MGE. I replaced it with a 2JZGE from a Lexus SC300. I finally got the thing to start, but.... It surges. PROBLEM; So, it surges at idle. I drove it to the end of the block and back (.5...

Noob,novice questions So i have a mk3 supra and a e-manage ultimate now i want to run boost on the 2jzge that's in the car. so Ive got a turbo and intercooler and all the tangible physical parts. but now im stumped on the sensors and actuators. i deal with PLCs at work so i get what inputs...

Hi all, Firstly I`ll go over the basics of my build and how I plan to do this. The car is a 94 supra 2JZGTE with a 6 speed tranny. I am planning on building a GE short block on the side to swap straight in to my car with minimum time off the road. So to make things clear this will be a...

so HX35 are typically t3? i have a 2jzge with stock manifold. the hx35 is the turbo i want to use for quick spool. i am not sure on parts needed to make it fit. so ill need 2jzge t3 manifold? feed line and return what size and where is best place to tap off from for oil supply? any modification...