Search results

alright got problem fixed had dead injector thanks for everyones help

but what if the clip colors are all white? maybe a pre 89 thing?

First all i swapped in a motor i bought, put it in and it seems to have a miss. so i pulled the plugs and the number 6 plug wire itself was covered in oil... I check down in the valley and it has some oil in it. I cleaned it out checked my valve cover gasket, and then installed a new one...

thanks man thats what i was looking for

I just installed a new motor in my car, now it seems under powered. I think maybe the wire for my injectors are backwards... I searched but came up with nothing on it. I need to know what color wires go to which injector any help would be great thanks

i put a different coil pack, bov, and re doing the intercooler parts. check plugs. after that i replaced the afm it fixed the sputtering problem but round 3-4000 it hits fuel cut or runs poorly. i shimmed the waste gate but it only went to 7psi.

do you know a good thread on how to do it I clicked the search button but nothing happened?

it ran good after the mods, it just started acting up a few days after the mods

I put new champion copper plugs put an open air filter. And shimmed the waste gate to 7psi. And cut the down pipe after the cat. And an evo bov. That all the mods it started fours days ago and since then I checkedthe plugs did the fuel volt mod cut the muffler off checked timing fresh oil...

Is an 87 7mgte all stock with open down pipe. And aIr filter. When diving it sputters when building boost then when at boost the car feels really nderpowered and it's running rich. But my boost gauge is reading steady but it feels like it's not picking up speed and it just sputters when you...

thanks

i tired that number but no luck, im needing a stock bov and i figured they made some a aftermarket one the was better. i'm just trying to get a hold of one

I've searched but i couldn't find the part numbers for the bousch(SP?) BPV can anyone help me out?

alright thank you i appreiate it

it's the maf translor gen 2 i want but need to know ifit works on the n/a ecu