Search results

Guys, i need some help. When driving, the "brake", "battary" and the amber "tail light flasher" light flicker on and off in unison. What causes this? They flicker almost as if there is a short of somesort. Is it an error condition, short, or even related to some other electrical device (such...

I'm doing this install as well...which one is the "speed sensor wire"? Where is this located?

foot was not on the gas, and A|C was not on. Could this error prevent starting?

My car is throwing an engine code 51. Would a defective throttle position sensor or the other related issues to this code prevent the car from starting? What troubleshooting techniques are there for the throttle position sensor? Let me know. Thanks

I'll have to get someone to help me out. I can't tell from inside when trying to start. If they aren't, what does that indicate?

Thanks...I checked the resistance of the CPS as specified in TSRM and that checked fine. I'll check the wires as well

I can't get my car to start. I found that I am not getting any spark. I tested the coil resistance as specified in the TSRM as well as the voltage to the coils..all checking out fine. I also checked the resistance on the ignitor. THey were within specs. I had some issues with the 3V test; so I...

It was quite a waste of money. I pulled the problem injectors out, cut thier connections and re-soldered them, just to ensure the connection is correct. I also got new plugs. I'll put it all together again tonight and see if that fixes it.

I completed an install of a MHG, 550's/lex/walbro and plugs. When I started up, it ran really rough, and I found that cylinders 1 and 3 were not firing. The plugs fire and injectors were tested by RC before shipped. I tore apart the engine again to find what's going on. Here are some things that...

what is the gear ratio like? When the crank is set to the zero position, and aligned with the cam gears at thier position marks; then the engine run; should the cam gears line up with thier marks when the crank is set again to it's 0 position?

I found the cause of my issues. I think the timing belt is slipping. I align everything and tension up the timing belt. I start the car, it runs fine for a second, then gets progressively worse. I turn it of and check the alignment to find everything way off again. I've redone the above many...