Search results

  1. C

    What is the best way to clean grime off of head?

    I'm installing a new head gasket but the head is covered in oil and grease so I want to get it all cleaned off. I have a gallon of purple power and brake clean, or I can pick something else up. What would be the best way?
  2. C

    Coolant out exhaust?

    Thanks dragracer, I will triple check all of that today.
  3. C

    Coolant out exhaust?

    I pulled cylinder 1 spark plug and it was a little black but not wet. Then I pulled cyl 6 and it was soaked in gas. I pulled those two because I can pull them without removing other parts.
  4. C

    Coolant out exhaust?

    TPS is set correctly. I'm not really worried about the code at the moment. I'm more worried about getting it to run on all cylinders. I pulled the number 6 plug and it was soaked in gas. I don't know what its doing
  5. C

    Coolant out exhaust?

    Well yesterday I swapped out the injectors with different oem ones. After putting it all back together I checked for codes before starting it. It is throwing one code, 51. Which after some searching, it deals with the tps. I checked and I did have it hooked up correctly. I tried resetting the...
  6. C

    Coolant out exhaust?

    I have a friend that works at a nearby dealership and is going to bring over the testers this week when he has a chance. He's a GM Master tech, but has never really worked on one of these.
  7. C

    Coolant out exhaust?

    Overheated, there were no signs of the head gasket being blown. It was rebuilt 700 miles before my rebuild. A hose blew causing it to overheat after I put a new thermostat in because the po did not have one in it.
  8. C

    Coolant out exhaust?

    Yes the block was decked with timing cover on. It should seal good since I did not use a metal head gasket. I am going to test the compression in all the cylinders when I get a chance this week. Also so far there does not appear to be any coolant in the oil or oil in the coolant yet. And I am...
  9. C

    Coolant out exhaust?

    Sorry, it has brand new ngk spark plugs, wires are good. I also tried pulling the fuel infector plugs to see which cylinder is dead. 4,5, and 6 all caused the engine to bog down more. 1,2, and 3 did not affect the way it is running, in other words it did not cause the engine to bog down. Also...
  10. C

    Coolant out exhaust?

    I just rebuilt the 7mgte. I did not use a MHG and the engine is running rough so its missing on at least one cylinder. I correctly set the timing and messed with the tps. Seeing that the head gasket is brand new, could it be seals in the turbo?
  11. C

    Will 2jzgte knock sensors work on a 7mgte?

    Looking to buy a set and would like to know if anyone might have an idea. Thanks
  12. C

    Will injectors from a 7mge fit in a 7mgte?

    Yeah I did. I know the timing is correct, so I don't know what else to look at. Whatever it was, it was caused when it overheated and rebuilding it didn't fix that problem. Thanks
  13. C

    Will injectors from a 7mge fit in a 7mgte?

    Well I checked it with the engine off and the cams in line and crankshaft at 0. Then I ran it with a timing light and it was at 10. Thanks
  14. C

    Will injectors from a 7mge fit in a 7mgte?

    I was just wondering if anyone could think of things to check on this problem yet? Thanks all
  15. C

    Will injectors from a 7mge fit in a 7mgte?

    Well if the knock sensor isn't causing it to run like crap, then that's the least of my worries. Also notice today my new battery died so I jumped the car. It ran for 20 min and then turned it off and the battery was still dead. I must have hooked the alternator up wrong so I'll take a look at...
  16. C

    Will injectors from a 7mge fit in a 7mgte?

    With the car off the timing is set at 0. With a timing light and the car on running about 700 rpm's, it's at about 10 btdc. When I got the car I noticed that the po already did the rewire for the knock sensors so I'm thinking its just running so bad that it's triggering the sensor. I cleared...
  17. C

    Will injectors from a 7mge fit in a 7mgte?

    Also would like to add that it's throwing code 52. I reset it once and it popped back up one I restarted the car.
  18. C

    Will injectors from a 7mge fit in a 7mgte?

    Well then does anyone know how to test the injectors while the car is running. Here's the symptoms, I rebuilt the engine due to overheating it. It ruined the main and rod bearings so I replaced those along with a new head gasket. When it overheated, it started running really rough with a miss...
  19. C

    Will injectors from a 7mge fit in a 7mgte?

    I wanted to snatch some extra injectors from the local junk yard for my car and all they have are 7mge's, so will those also work in a 7mgte? Thanks