Search results

I bought the following clutch for my 1jz project http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350360113168&viewitem=&sspagename=ADME%3AB%3AEOIBSA%3AGB%3A1123 After less than a 1000 miles the friction plate has decided to weld its self to the flywheel, you will see from the...

New update, the engine warning light now comes on after calibrating the tps it picks up in the higher revs but still splutters, before doing the tps no engine light come on i have tried the manual diagnostic check and its showing up code 42 which on looking in the manual is the speed sensor...

I have a auto 1jz loom and ecu with a 5 speed r154 conversion put into an m3 bmw< I have the car running but around 4000 rpm its cutting and spluttering< I have changed the coil packs plugs and ignitor for known good ones and stil the same problems, on researching I have found the following...

Finally got the car up and running but the mappers are having problems with it reving past 4500rpm he said it feels like a boost/fuel cut. the car is an m3 bmw running a 1jzgte engine mods on the engine Emanage blue, 3 bar mapsensor and additional injector harness installed Precision...

anybody?

Thanks :) Getting there with the wiring me dads made up a basic loom to get the car through an MOT here< im going to need an auto electrician to wire the engine in as I dont want the fry the ecu if any mistakes are made then im up an running. as soon as the cars on the road ill have it...

Thanks for the comments I have done a build thread on another website if your interested http://www.bimmerforums.co.uk/forum/f82/my-e36-1jz-single-turbo-track-road-car-t38569/

Thanks for that surely everything I will need to fire the car up is in one conector block with out having to ad power to the injector and ignition wires?

I am at the final stages of finnishing my M3 BMW project with a 1jzgte engine conversion, the whole car loom has been removed so all I have is the 1jz engine loom and ecu in the car, I need some help from the pin out diagram below to get this engine running, I just need the basics IE what pin...

Can someone please confirm the correct way to wire these in, as there seams to be so many orders in the above :) john

Hello new to the site after some info to help with an unusual build, im putting a 1jzgte engine with an r154 gearbox into an M3 BMW for something a little different :) its nearlly finnished just need to get the 1jz wired in