Search results

I cheched with King and they said the bearings are Bi metal

I have King bearings # MB 787AM STD #1 bearing stamped M787/1U AM STD, #2-7 BEARING STAMPED M787/2U AM STD. This is going to be a daily driver car, and wont see much high RPM Thanks Rayc

I would like your opinion on main bearing clearance. I am in the process of rebuilding the bottom end of my 88 7MGTE, because of a rod knock on the #4 cylinder. I have disassembled the block and had the block and crank to the machine shop. The machinist milled the deck of the block, cleaned...

I got the engine out of the car and torn down, did find a bad #4 rod bearing. in the process of rebuilding. Thanks for all the help. Ray

I pulled each spark plug wire until the noise stoped, it is the #4 cyl. Dose this mean that it has to be a rod, or could it be a cloged #4 injector causing it to go lean and creating detonataion inthe #4 cyl.

Sorry for the delay in getting back had computer problems I checked the engine with a stethoscope, and there is more sound coming from the lower block than the head or manifolds. I dont remember if i had this noise before I replaced the head gasket it was serveral years ago. I did cahnge the...

Need HELP!!!! I have a 1988 supra with the 7MGTE turbo engine in it and 158,000 miles. I have replaced the head gasket with a metal one and ARP head stud. I have rebuilt the turbo back to stock with a 3 inch down pipe and removed the catalytic converter. I am getting a knock or ping from the...