Search results

all right here is the deal i blew out the head gasket on my 87 t and i replaced it with all new arp bolts and what not and now it runs just fine and don't smoke but like after twenty minutes it starts burning alot of oil and smoke comes pouring out of the exhaust it burns about a quart every...

hey guys i know this is suppose to be a supra page but i am in a hurry to go and grub but my brother has a 92 eagle talon n/a and the timming belt broke so we got some new heads and all new gaskets but i dont know what the heads are suppose to be torqued at so if any of you can tell me that...

hey dudes i am in denver so add 1 more to the list

hey i am doing the same thing and i need a link or something to get some good studs can someone help me out

hey man my car was just doing the same exact thing and i threw some injector cleaner in it and now works great try it.I use naptha with alittle bit of atf in it.

hey every, body i was just wondering if the na injectors and the turbo injectors where different sizes and if they are what size are both

hey man if you are not running any additives than pretty much all oil is the same i have tested it all on a friction break. the only oil that did like 1 more weight was that castrol syntec, and the lucas did not make any of the oil we tested it in do any better

yeah i have checked all of that. i also took a test light to the connecters that plud into the gauges and on most of them only 1 prong makes it light up. my lights on the dash also work

hey everybody none of my gauges work except for my speedometer and my fuel gauge. i was wondering what it could be cause i have another set that i put in that also didnt work. i know that my oil pressure and water senser are pluged into the motor but i dont know about the tach. at this point any...

i have just finished my rebuild and i cant figure out how many degrees the timing should be before top dead center

if you check on the starter there is a little brown connecter just plug it in and if that isnt connected then it wont crank

hey where in the web site can i find it i looked all over and nothing

my na to turbo set up has worked as of now but the only problem that i cant figure out is how to get the oil to the turbo i am using a 86.5 block if you can help plz tell me and if you can send me a pic