Search results

I found this, http://cgi.ebay.com/ebaymotors/TOYOTA-Supra-1986-to-1992-Hatchback-Lift-Supports_W0QQcmdZViewItemQQcategoryZ33656QQihZ013QQitemZ230063814654QQrdZ1 or Item number: 230063814654 will this fit right in our cars? anyone bought this brand ? seems cheaper than toyota.. since...

Location: Houston, TX 1987 Toyota Supra Turbo - 5 spd 170,000 miles Still runs strong. Cold A/C, everything works except the rear defogger heating coil. White with Burgandy interior Exterior and Interior in very good condition.. Front bumber paint is peeling on the top side...

During routine inspection of the bottom side of my 87T, I found a torn power steering rack boot on the passenger side. No grease or oil inside anymore.. the rack doesnot make any noise when turning.. I just happend to see the tear.. How hard is it to replace the boot? Do I need to take the...

I am trying to rebuild my differential. The problem is the pinion gear. I removed the internal assembly from the diff. Now, I need to remove the pinion gear from the case. removed the front seal, oil sling, then how to remove the bearing without an SST? I thought once the internals are...

I bought a used LSD from a 90T for my 87T from a member in this list. Now, I am confused of what fluid to use in the differential. I did some search in this forum, and people talk about Redline/Royal Purple/Ford Motor Company etc.. in 75w90 grade. The differential require 80w90 fluid per the...

Who do you guys use for injector cleaning.. For cleaning and balancing injectors ? vendor close to Houston (for my buddy) would be good..

My 87T (5spd) failed emissions today. It passed CO and NO levels (at about 50% of the spec value). The emissions are checked at 15 mph and 25 mph in Virginia. HC level was 108 ppm (limit is 108ppm) at 15 mph and 181 ppm (limit is 105ppm) at 25 mph. Mods include: Lexus AFM with screw...

haa.. see pic

My 87T had a rolling noise as the car moves.. checked the driveshaft center bearing.. it had lots of play in it.. so, I replaced it, replaced the front, and side seals on the differential, filled LSD with new fluid, and LSD modifier liquid. The car still makes the same noise.. I can hear it...

my headlamp washer was not spraying liquid to the head lights.. water seemed to comeout from the underside of the front nose.. i polled it all apart, and found a plastic valve (one in and one out) right before the spray nozzle. there is a small hole on the valve body and water is coming out of...

The front flange on my 87T LSD differential was leaking with a new seal. I found some scoring on the shaft where the seal lips ride. someone told me about speedy sleeves that can be used to on the shaft surface where the seal meets the shaft.. have anyone used one like this? or can this flange...

my differential is leaking oil on the front and one of the sides. I bought seals from Toyota. Is this a hard job? I looked at TSRM.. there are some SSTs mentioned.. have anyone done this without SSTs? I dont have a slide hammer.. is that required for the side seals ? Luke. 87T (with some mods)

The center bearing on my 87T M/T propeller shaft has little bit of a play in it.. the shaft can move sideways (about an inch). The rubber part as well as the bearing is moving around inside the housing. Time to replace? Also, i saw some notes (before SM got hacked) about one-piece shaft.. i...