Search results

Hi, does anybody happen to know the parts or part numbers of the brake and clutch lines. From the master to slave for the clutch. And the sizes for these hose so I can get russell's ftiings and ss hoses and make my own. #47313 #47312 #47322 I'm sure they are all the same size, just don't...

Alright guys, I just recently attained a 85 cressida with a 5mge with a slipping auto trans. One oddd thing is that it only slips when the trans is cold and is fine when it warms up. There is a mk2 in a junkyard close and it is a 5 speed, will the pedals fit in the cressida?

Alright, I have been searching for about 2 hours for the jza70 ecu pinouts and wiring diagrams to wire it into ma70 body. I know there was a 1jz swap bible thing on azsupracentral.com but I cannot seem to find it.

If you are from Iowa or live close enough to Iowa to go to the tracks here. Tell a little about yourself and your car. I bet that I have met and know most of you but I know that there are some more out there somewhere. Even if you don't have a supra, but you are on this forum, let us know...

Alright, here is the deal, I have been researching about 2 steps. First, the msd dis-4, is it just a rpm activated switch or a rev limiter? Second, the Bee-r, it kinda looks cheap to me, is anyone using it? Third, I want to know what you guys are running and what you are using to...

Who sells flanges for a tial 44mm bov? I have searched but no one sells just the flange.

What is the code 31 for? Hydro-fan? Mine is leaking and I am driving home to fix it and my check engine light comes on.

What are some of the known problems with the hydro-fan on the 1jz. I am trying to decide to fix my leak with a o-ring or just go with my flex-a-lite fans from my previous car. Does any body have a diagram of the assembly or part numbers.

I just bought a supra with a 1jz swapped in it, and upon expecting it I found a stealth ecu. Does someone have the specification of one, rev limit, fuel cut.

About 2 months ago I stopped at this guys door (had a supra sitting in his driveway, looked like it had been there for almost a year) and asked him if it was for sale, it wasn't. And about a week ago I heard that he might want to sell it. Talked to him a little bit and found out that he had...

I am searching for a jdm 7mgte and came across this http://www.jdm-online.com/jdm-engines/toyota-engines/7m-series/jdm-toyota-supra-7mgte-86-92.html I have a few questions. Can the afm be where it is? What size turbo is that?

Alright guys in about a week I will be buying a jdm 7mgte and i want to know how can I tell what the redline is, pre89 or 89+?

So about 3 months ago I bought my 88 supra turbo with a bhg and unpluged coil packs for $450.00. I did the hg with a titan 1.4mm hg but didn't get the block machined and am now paying for it, with oil in my antifreeze, but luckily not the other way. I will be swappping in a jdm 7mgte with my...

I know there are probaly hundreds of these threads around but did not seem to find this symptom which is hard cold starting, could it be coolant in the combustion chamber before start up, after it has cooled down and sat overnight

I have just got done putting a helicoil in my head so I could put the manifold back on and get it running again. But I don't know what to torque the studs to, and I can't seem to find it in the repair manual.

My 88 supra won't start. I took the starter off and took it to napa, it tested fine. Then I thought it would be the clucth switch but that was fine. I need help. Please give me ideas to try and get it started.