Search results

just wondering if there is any performance issues with using top vs side feed injectors. compare 880cc injectors at 75-80%% flow rate, is there going to be any noticeble difference between the two? need to start going through possible setups and need enough fuel for a pt67 with a .81 turbine...

stock 1jzgte, only thing is e6x what do people think for this baseline? 273/265 13 peak psi with 93.9F degree intake temps any issues or is it about on par for a possibly 20 year old engine. I'm having coil issues , just seems like power is down for 11-13 psi. side not: wih the fuel...

its a stock 1jzgte with a haltech. I was just wondering what factory boost levels are for the twins, my brother's car is hitting 13lbs and then hits 15lbs around 6k rpm. I thought it was a gauge issue so i looked at the haltech...its hitting those boost levels. I imagine the wastegates are...

I'm about to install my haltech e6x on my 1jz. I was talking to my friend last night and he said he using the rear cam sensor and the crank position sensor on his mircrotech. the harness i have has been wired for the two cam position sensors. Should I rewire for the crank sensor or use the...

I've been wondering if i should start a thread, but i can't seem to find information that makes me want to start fabrication. 1. I have a pwr barrel, due to the fact i could not get my precision air to air to fit properly with the factory bumper support. So I decided to trade with a friend...

Went with a friend to KCIR this weekend. We got 2 passes in with the car and did very well. The temp outside was 70ish and it was great. It was well worth the 3 hour trip down and 3 hour trip back. first run was 11.2 at 125 second run was 10.7 at 124 had a 1.4 60' with we could...

not sure if this is vpc related or not but here is a link. http://www.supramania.com/forums/showthread.php?t=76336&page=2 read page 2 it lists my problem. any help would be great

my ears in pain my 2jz screams and also sounds like a v8, my timing is set and i don't have any stored codes in the ecu i think i have a huge vaccum leak/ exhaust leak, comming from the exhaust side of engine also on the crappy rev and idle anyone have any ideas were to start it is dead...

ok...bought it back in high school with a blown headgasket no big deal, shipped here from st louis recevied it on dec 22 2005. here of some pics when the snow started clear then i started to drive it...granted it was my first cluctch so the next thing that went was the...

I installed a hks vpc in a 89 supra, and when I did,I checked to make sure it worked before i installed the rest of the dash. When I checked it, the car was takin apart, it lite up when the key was in the on position. After installing the dash, it doesn't turn on when the key is in the on...

I'm almost done with the 2jz na-t swap. its a 89supra; 92 sc300 with 7mgte electronics 1st; I'm running a vpc set-up and i'm wondering about what rom I should get? with the vpc does it overide the factory full curve or just add to it? I'm thinking about geting a mkiv chip and making the...

My car is not running right now so I'm going through and fixing all the little crap that a 20 year old 190,000 miles car breaks or wears out. I noticed when i press my brakes I seen little bugs and crap in my tails. Question,how can i seperate the houseing from the lens? I really don't want...

-I need two flywheel bolts for a 2jz -all of the bellhousing to engine bolts looking for specs

I will be running a ct26 60-1 and a vpc with a gcc(yes it is limiting but i have it and i'm gonna try it). i plan to run this turbo almost to max psi before it becomes a hair dryer(if anyone knows max psi that would be great). just wondering how much power i'm going to be producing so i can...

is there a place were i can buy a new camshaft postion sensor cover i don't want to spend $$$$ to buy a new one(cps) just becouse my cover is broken,i found the billet ones but woundering if there is a part number for a auto store or something like that. admin plz move if in wrong section...

if anyone could tell me what chip E204 is and what it does that would be great..and if it dosn't work on a 89+ supra could i just get a different chip if i ordered one and just put it in?i can post pics if they are needed.i have a gcc also if that makes a difference. thanks caleb

would the Centerforce Dual Friction clutch and the Fidanza flywheel be a good combination,ive herd of some clutch's that becouse of material that they are made of will "weld" themselves to aluimun flywheels. will this clutch be okay to use with the alumiun flywheel or if anyone has any...

as it states,i don't daily drive the car and i could care less about the ride but i have been working on it during the winter,and i got it running pretty good(just did a bhg and other stuff),and i was just woundering if it was worth keeping it(the tems)?? thanks for any opions/flames.