Search results

My car has a perfect dash but has been rear ended it was not stock I have alotof time in it and I was just about to start on making it look good. Well there is another mkiii near me that is in just about perfect condition but the dash is fucked in it. Are these cars still worth buying or are...

Ok when I get on it it just keeps goin up on the stock gauge and then it just like looses everything I checked the waste gate with air it opened and closed good. What could be the problem please and thank you. P.s. my mods I do have are filter stage 2 crower cams. Full three inch exhaust. Cam...

http://www.jegs.com/i/Derale/259/25719/10002/-1 ive been looking at oil thermostats and the mocal is super expensive i was wondering if this derale stat is anygood its 1/2 npt and 180 degree. any suggestions im running on a budget. but i have badoil leaks and i'm goin to upgrade and fix at the...

is there any real bolt applications for our cars i dont wanna relocate alot of stuff unless i really have to and i don't want to remove the front support. im pretty good with making brackets or mounts and all. p.s. if i have to relocate the oil cooler where is it best moved to and what kinda...

ok i have had the 52 code come and i checked the wires its pretty bad looking. so i ordered two new plugs and ill rewire them. its also allways showing code 21 o2 sensor but its allways been there i had some wires touch and ever since its stayed on no matter what o2 sensor i put on it but i...

it acts just like it does when u blown an ic pipe off but it idles and drives just fine and its all the stock turbo stuff. mods: bc 264's,3"exhaust, arp head studs, titan motorsports head gasket. ok problem is ill be driving as soon as it start to hit the zero on the stock boost gauge it will...

i took off my lower ic pipe to fix it because it was cracked. when i disconnected the coupler to the intercooler a little oil poured out like just a little ,but oil is like all over the inside. the upper part of the ic pipe around the engine has a little also I've been told this is blow by. the...

does any one know why this would happen. here's a list of mods i have: stage two crower cams crower springs,fidanza cam gears, titan motorsports head gasket 1.4 mm, arp studs torqued to 80footpunds. three inch down pipe and three inch all the way to the back k&n air filter, blow off valve...

i have corwer cams no degree done just played with them until it ran like i wanted, but i have a aem afr gauge and its been reading fine but lately its been all the way on twelve on idle and full throttle but it was reading fine staying in stoich while driving so i have another afm and body i...

will rota grids fit 17x8 off set i need to know whats the good offset

when you put a front mount on a mkiii theirs like support bar that goes right in front of it. i have seen where someone cut the middle section out of the support bar or completely took it off is this safe or is this something you shouldn't do bc you cant even really see a bad ass front mount...

does anyone know where to buy them or does any one have an extra

i have installed crower cams 264 and haven't been able to get the car running. i installed an AEM AFR gauge today and it is pegged out on the rich side while trying to idle. Could the cams have anything to do with this. and i believe this is why it isn't idling. it wont idle unless i pull off...

i have crowers 264 and they will not run right so i have got fed up with it but i have a question i have two motors i took the head off the motor in the car that now has the new head and cams but i want to put the stock camshafts back in the head on it should i need to worry about journal wear...

will the afm off an 89 work with my ecu or they a little different both turboes i got the afm of an 89 turbo bc i think mines bad but i want to know if it will work right

I have cams and ever since I have installed them and crower springsit has not idle very good if I get it to idle good it will start acting up and stall when I let off the gas sometimes I pulled some vacuum hoses off and it ran alot better with a vacuum leak whish would usually makes something...

has any one used siemons injectors are they any good im thinking about buying the 550cc with clips from driftmotion and what all do i need for an install on a apexi afc on a 91 supra 7mgte or if i buy it from apexi does it come with everything i would need. is there a difference between the...

what all do i need to install and does it need a wide band sensor to work or can i hook one up and it show me the afr

it ran fine until i got the head rebuilt and installed a titan 1.4 headgasket and crower stage two cam i have been trying alot of stuff i fianlyy got adjustable cam gears that helped a crap load but now it had a dead spot when u first hit the gas and runs a little rough and stalls everytime u...

i need idle control i have crower cams and it doesnt idle very good jus give me some suggestions please and thank u