Search results

Who is with me? We need a meet here soon. Lets get this on a roll.

Just wanted to make sure I'm on the right track. The JDM 2jzgte Aristo motor and wiring harness will work with an AEM EMS setup correct?? I swapped an Aristo 2jzgte motor into my MK3 Turbo 5spd Supra and mated the MA70 dash wiring to the Aristo engine harness, it starts and revs out nicely on...

Just a few pics of my progress!! Here is the rest of my thread... http://www.supramania.com/forums/showthread.php?t=78918 Jack stand KING once again, waiting on it's 4 inch exhaust, I/C piping and stainless fuel lines then on to getting tuned!:naughty:

This is a little number I've been working/wrenching on for almost 2 years now. I have had bad and good experiences with this car but the future is looking real bright from now on for her. I will post more pictures of the entire car and exactly what I'm doing to it later on.:naughty: P.S. The...

Alright guys, I'm in the dark about the engine diagnostic wiring on the big gray junction block on the aristo 2jzgte body wiring harness. What is the correct thing to do with this wiring? Please help Thanks Greg SMith

Alright guys please help me out on this one. I'm looking through all the info that you all have provided us new comer (Thanks soo much) with on the 2jzgte wiring into our MK3 supras but I have a question. Should I have another connector for the ECU? I seem to not have or missing connector A for...

I just purchased this motor 3 days ago and was looking over the motor and found this. I'm new to the whole JDM 2jzgte swap and was wanting to see if you see anything wrong with this picture. There are 3 places for ball bearings at the back of the head and appears that one has popped out of...

What are good compression numbers for an Aristo 2jzgte?? I was told by an importer (Royaljapanmotors.com) that the compression was 250 across the board on a motor they are ready to ship to me! I just want to know if this sounds sketchy Thanks

Thinking of running an aluminum fuel cell in the rear of my supra and need opinions. How would you guys wire an inline Aeromotive fuel pump? Would you use the stock 12+volt signal wire from the ECU to the pump or what? Fuel level sending unit?

I have an 89 Canadian Targa Supra, and well u know how most Canadian cars age over time! PART of the frame rails are rusted, but not completely rotted. Being that the chassis is based upon a unibody construction, structural points are integrated into every part of the chassis including the BODY...

Has anyone thought/done a wire tuck for their main wiring harness to clean their engine bay up???

Oil relocation kits! Which kit is best for the 7mgte???

What size/brand fuel injectors would you guys recommend say for 600HP??? I'm leaning towards RC engineering!

Coil on plugs! Where can I find them for the 7mgte and what electrical mods will have to be performed??? Thanks in advance

Hey everyone, I have a question! I wanna run an external Aeromative fuel pump instead of just the 255 walbro fuel pump! Should I run a seperate resistor/relay setup on this or use the stock factory fuel pump wiring to complete this setup?

Is this mod possible on the MK3 Supra (MK4 Supra brakes on MK3 Supra)??? I haven't found any tech articles discussing this matter!

I have searched hi and low for a JDM Folding Mirror wiring diagram and have found nothing! COuld u guys give me a hand on finding some diagram to go by?? Thanks Greg:nono:

Here's my problem: After wrecking my NA Supra last summer I bought my friend's Canadian 89' Targa Supra and a Silver Greddy turbo timer was already installed! I double checked (using test light to ignition key cylinder) every connection from the timer harness to the points to where to tap into...