Search results

  1. IBoughtASupra

    1JZGTE with a 2JZGTE headgasket

    You can do that. Get a mic and measure both the stock 1JZ-GTE and 2JZ-GTE head gaskets and I can add that info to the thread!!
  2. IBoughtASupra

    Big single upgrade!

    ^Correct! I forgot about Precision.
  3. IBoughtASupra

    It's here! Part Shop Max!

    Trust me, they are legit. Cheap to rebuild and I assume a warranty. The drifting 240SX guys swear by these things. Top notch stuff and I don't believe they would use anything cheap as their cars are usually inches away from kissing a wall.
  4. IBoughtASupra

    1JZGTE with a 2JZGTE headgasket

    Also, we are assuming you have a correct thickness to keep the compression ratio in check.
  5. IBoughtASupra

    1JZGTE with a 2JZGTE headgasket

    Nope. All lines up. Theory proves true as well. The 2JZ head gasket feeds the 1JZ head coolant and oil when used in a 1.5JZ, so why wouldn't it do the same on the 1JZ block. Whatever is ports that are on the 1JZ head are on the block. Its that simple. The 1JZ link I gave you, it shows the...
  6. IBoughtASupra

    1JZ Swap Parts Into a MKIII - List -

    Click the link in my signature and it will lead to my thread and read away.
  7. IBoughtASupra

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    Rakkasan, still waiting on your input on the head gasket selection area.
  8. IBoughtASupra

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    New Update: I had a friend bring a stock 2JZ gasket over to the shop. I have a 1JZ block and I laid the 2JZ gasket over it and I have one thing to say.... I should smack the person who said the gasket would not work and started this whole nonsense. The hole on the block fits the 2JZ gasket...
  9. IBoughtASupra

    1JZGTE with a 2JZGTE headgasket

    I had a friend bring a stock 2JZ gasket over to the shop. I have a 1JZ block and I laid the 2JZ gasket over it and I have one thing to say.... I should smack the person who said the gasket would not work and started this whole nonsense. The hole on the block fits the 2JZ gasket. The 1JZ...
  10. IBoughtASupra

    7m bolt-on to t4 conversion help

    Change the rear housing. Contact Albert, he would know best.
  11. IBoughtASupra

    Xzeror's Clean 86.5 Progress

    A lot of the plugs look similar, need a better picture up close. Did he leave those plugs off the harness? How many pins do each of them have?
  12. IBoughtASupra

    Big single upgrade!

    The DM manifold is okay. It is not really the greatest. You have to modifiy it to work properly. The runners drop to low and won't clear the exhaust manifold studs and what not. This is being said from experience. Your best best is to get a drewgo manifold BUT that is no longer available...
  13. IBoughtASupra

    It's here! Part Shop Max!

    ^ Mr.FunnyGuy :biglaugh:
  14. IBoughtASupra

    '87 Drag Car 7M awesomeness

    I donate at the local sperm bank.
  15. IBoughtASupra

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    What? The JDM pump is the hydro pump and I said it is an option but more of a hassle if it goes bad as parts are not readily available.
  16. IBoughtASupra

    Xzeror's Clean 86.5 Progress

    Not really, just pour half out using the level on the side of the bottle and then fill it up with water, shake to mix and fill up.
  17. IBoughtASupra

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    Edited the thread once again. Check the 1.5JZ Head Gasket selection and let me know what you think.
  18. IBoughtASupra

    Xzeror's Clean 86.5 Progress

    Didn't get the pre-mix? How come?