Search results

I demand the status of this. I have also posted on the Racepak forum and got a reply from an admin. If you have an AEM V2, you can have the Racepak work with the AEM V2 by using an interface module that they make. Here is the link...

Koyo works fine! Don't have to get a PWR.

It pulls cylinder one by a half a thou and makes it an oval.

They said they were down sizing. You don't need the 1JZ diagram. You need Haltechs diagram. Just get the full harness, usually comes with labeled ends and buy the plugs and do it yourself.

BIC is still operating!? I know they did have a deal on Haltech units.

Whoops! I just saw this. See, he can get you deals. Trust me, deal with Don. He will explain anything you ask. Two important things that are 7M specific are the front timing plate needs to be bolted to the block before having it decked as the head sits on it and the tensioner will need to...

He will machine the block and if you want him to assemble it as well, he does that too. He assembles motors all the time and there has not been any bad reviews from him as his machine shop opened up SPECIALIZING in Supra motors and his 2JZ have proven he does. Just bring all the parts at once...

Can you do wiring? It's not as straight forward as people like to think. If you have a hard time with OEM stuff look for a plug and play AEM kit like I have for sale. If you can do wiring, go ahead and pick up the "deal" with the harness and the plugs from your local Toyota dealer or...

*Cough JZ Cough*

I have a spare 7M harness only good for plugs and I will see if the CPS plus is good. If it is, I cut it off and send it your way. I will let you know tomorrow.

Only tech section? Huh

Giggled the wires?

Are you sure you want to do that. I know a lot of people hate it, trust me, you can see the intercooler even with the mesh there. If you want to show the intercooler get a bomex bumper, those the intercooler well.

Get the Feramic disk that will hold more than the bronze and take a beating. It holds 700RWHP and is made for drag racing but still sprung so it is streetable. I have it for sale, see the Winter link in my signature. Its new as well. Here is the HPF sale...

I am not sure about Illinois but maybe some members will chime in. You are about 7 hours away from Ohio. Don at Accelerated Performance is well know in the Supra world for his engine. You could gather all the parts and make a drive to drop it off and then pick it up. Every machine shop will...

110...stupid NY roads.

I'd like to get a one piece too. I asked Albert where he got his but he said jigga boos can't have a one piece driveshaft. :(

Just saw this. Happy Birthday and thanks for keeping up this site where a wealth of information and good deals from vendors are available for Supra owners.

You plan on boring the block or already have? Call up Weisco and see what their specs are.

Any piston will slap if the clearance is correct. If you like Weisco's, get them, they are good pistons and will hold up fine.