Search results

can i get some opinions regarding my ignition map for pump gas at 18 psi with BC's 272's, new HG, arp head studs, very light porting and polish, Haltech platinum sport 2000, dual walbro's, 6an lines, aeromotive fpr, cam gears at 0 and not dialed in with a dialer gauge and wheel, r154 trans...

anybody?

starter or ignition (it's a plastic piece the key turns and engages the circuitry) most likely the starter. the brushes are worn out. simple job and you shouldn't pay more then 60 to have it rebuilt with warranty.

sounds like a fuel relay. if it was the igniter it would of stalled on you while driving once it heated up. when you say it won't turn on what do you mean. it cranks and won't start. it doesn't crank, does it act like it wants to start but doesn't. more info

I'm trying to get info on this alternator off of a aristo 2jzgte it is a round plug with colors red/blue, yellow and white what are the pinouts on the alternator? thank you in advance

norcaldrifter keep me posted on your outcome. I'm doing a 240sx too. I'm running a haltech sport 2000. What i've read it's able to manipulate any signal from 0 to 50,000 hrts, so i should see mph but i won't know until i get it on the dyno and start plugging numbers in.

wow, Amazing. You drilled that question down. thank you very much. It seems like you made it a mission. Again, very thankful for all your help. Happy holidays. I'll let you know in about a week or so the outcome. I'm currently returning my e11v2 and switching for a haltech p2000.

Hmmm.. it could be a hall that would explain the three wires. but, then again i believe the rear sensor also works as a abs output sensor and one wire could be for the abs unit. I'm guessing. but so far, your response is the best i've heard so far. Do you think a toyo dealer would know?

I'm using a haltech e11v2 stand alone. I can manipulate any signal to achieve my pulse needed to achieve speed. By wiring this in i achieve speed depedent and gear boost setting in open and closed loop and ati-lag without having to engage my clutch or any other action. I need to know what...

anybody have any info on wiring schematics and or info regarding wire up? I can't find anything regarding what type of sensor it has. I know it's off a soarer 1jz with three wires (red, blue/red and yellow). thank you